February 22, 2012 2:09 PM PST
I am a newer rider , while i have had my license for over a year, I havent been able to get a lot of seat time in . I am still scared of traffic, but my question is why do I have trouble left turning on the move, no trouble from a stop, and I go way too wide on right turns from a stop and no problem with rolling right turns? Am I the only one with this problem? And any advice to help me? I took the course and know the "look where you want to be" . Thanks
When you look to where you want to be, how specific are you? Aim small, miss small! Don't look at the WHOLE lane, look at which 1/3 section you want to end up in...or even better, what 6" strip you want your front tire to be in.
When you are riding down a fairly straight road, do you stay tracked to one side of the lane or the other...or do you use the whole lane? Don't wander. Assume you are riding in a group, even when you are riding by yourself. Divide the lane into thirds, and choose which third to ride in...and the center should be your last choice, as that is where most of the grease is. I generally opt for the left, because where I live, the right side of the road usually has more bumps and potholes. So, I tend to track right along the double yellow center line, but I know some people get nervous doing that with oncoming traffic. My best suggestion is after you mentally divide the lane into thirds, you ride along the imaginary line that separates the far left third with the center third. When you make a turn, track right along that line.
As far as your specific issues with turning, I think someone else already mentioned
the key element: your speed. If you are going slower than 20 MPH, then you are able to steer your front wheel, and drive it around a corner. However, if you are going faster than 22 mph, then you do not want to turn the handlebars or try to DRIVE the bike. Then you want to counter steer and let the bike lean into the turn. The exact speed of where things change is usually in the 20-22 mph range, so you'll have to get a feel for your own bike.
To get a feel for your bike: When you are on a road which is fairly straight, practice countersteering by swerving around spots on the road or other imaginary obstacles... change your tracking position from the far left to the far right, but do it with intention. This is actually a handy skill...as it prepares you for being able to swerve around actual obstacles if you ever need to. So, you do not necessarily need to go to an empty lot to practice...find ways to practice even when out for a regular ride.
I have trouble left turning on the move, no trouble from a stop
I go way too wide on right turns from a stop and no problem with rolling right turns
What exactly is your left turn trouble? If turning left from a stop is not a problem, I am thinking you are starting out slowly. Since you have one lane to cross over before the lane you want to turn onto, you have the chance to get the wheels and motor spinning before you steer around the corner. However, on rolling turns, your speed becomes key. If you are on a road with a 35-45 mph speed limit, then you are going too fast to STEER around the corner and will need to countersteer. But leaning a bike into a 90° turn at 40 mph may result in sparks flying as metal parts drag along the ground. You have probably heard that you should slow down before you start a turn, and throttle up as you go through it. Brake when on approach, while the bike is straight and upright so you don't have to risk braking while in the turn. However, if you slow down to below 20 mph you should not then try and countersteer, unless you are ready to throttle up! I suggest you slow down to 25 mph as you see a left turn approaching, then throttle up through it, so you end up back at 35 or 45 mph once the turn is completed -- unless the turn was marked specifically as a 15 mph turn. Practice left turns by tracking to the far left of your lane, and looking specifically to stay on the far left of the lane you are turning on to. If you cannot see around the turn, then slow down to 15 mph and steer into it until you get a visual that it is safe to throttle back up to normal speed. If you do have visibility around a turn, then try leaning the bike into it at 25 mph. If you are going too wide, then you need to lean the bike into the turn more. Lean the bike by pushing down with your left hand, shifting your body weight over toward the left, or a little bit of both.
The right turns can get tricky from a dead stop if you are tracking to the far right side of your lane. They get trickier if you want to stay to the right after making the right turn, so practice doing them that way. If you enjoy riding in a group, it is a good skill to have! What makes it difficult from a stop is that you need to start turning almost immediately, before the bike has built up momentum and you get the gyroscopic effect from all the spinning parts (wheels and motor). So, don't let the clutch out all the way. Cheat the clutch so you can give it a little more throttle to spin the motor but not letting it transfer power to the rear wheel. Allowing the motor to rev a little will get things spinning, and the gyroscopic effect will keep you upright as you steer the bike slowly around the corner...just keep your speed below 20mph. You can practice your slow-speed balance as you approach red lights. Go as slow as possible, yet keep your feet up and keep the bike balanced...hold the clutch halfway in and rev the engine a bit. But be ready to drop a foot just in case you misjudged how much you needed to turn the handlebars to stay upright.