Forums » Biker Chat

Back To Topics

Turn Signal Conversion Installed

  • CarbJetKits
    • 2 posts
    February 26, 2012 6:11 AM PST


    Probably one of the best modifications i have done to improve my visability
  • Seakers
    • 1161 posts
    February 26, 2012 12:28 PM PST
    By the way most people want to see how it is done not just the final product, and what it was like before it was completed.

    Just thought I would say something. But I do kind of like it lighting up and blinking when front breaks are applyed do the rear breaks do the same?
    And what kind of thing was it and can it be done with or with out LED's?
  • blurplebuzz
    • 3006 posts
    February 26, 2012 1:17 PM PST
    Looks interesting,is that running with LED's or reg bulbs? It certainly gits attention !
  • RexTheRoadDog
    • Moderator
    • 19067 posts
    February 26, 2012 10:36 PM PST
    I have a similar LED unit on Rex (04 King) that does not include the turn lamps. I can program the number of flashes of the brake light from three to ???. Mine is set for eight (within 2 seconds). I have had PA State Police tell me how great it is for visibility. It was a complete bolt on replacement of the taillight housing, and took about 5 minutes to install. It is especially good to tell tailgaters to back off. Just one or two taps on the front brake lever usually gets results, that plus me obviously looking at them. Anything that gets the attention of cages behind you is good.
  • RufCut
    • 58 posts
    February 28, 2012 7:34 AM PST
    Where did you get it? How much? Was install easy? Hard? Need input....